Untitled Document
    
I wondered why the lights had stopped working.

The wire was rubbing on the frame (as shown by the arrow) where it exited the left hand cover. There was no sleeving protecting the wires so, either someone had removed it from my new one, or had swapped cables with another bike.

I now know why it was rubbing on the frame. All the threads on the height adjusting screw had worn away with the vibrations (no grease as usual). This has now been replaced.



To fix it I soldered the frayed wires and rotated the cover 120 degrees anti-clockwise so the wires could not contact the frame again:





All Content is Copyright © 2002 - 2006 Fowb Limited